TOPS: Selection table for stepper drives

Specification	Packaged Stepper System Drives
Specification	T/PPDO2035	T/PPDO3540	T/PSi3540	T/PPDO5580	T/PSi5580
Motor Current (A/phase)	0.125–2.0	0.2–3.5	0.4–3.5	0.5–5.5	0.5–5.5
Input Voltage (VAC)	110/220	110/220	110/220	110/220	110/220
Steps/revolution	200–400	200–50,800	2,000–50,800	200–50,800	2,000–50,800
Maximum Output Power (W)	70	140	140	440	440
Overall Size (mm)	445x102x173	572x198x137	572x198x137	76x135x203	76x135x203
Typical NEMA Motor Size	11, 14, 17, 23	11, 14, 17, 23	11, 14, 17, 23	23, 34	23, 34
Built-in Power Supply	•	•	•	•	•
Screw Terminal Connectors	•	•	•	•	•
Pluggable Connectors	•	•	•	•	•
Built-in Oscillator	•	•	—	•	—
Oscillator Speed Range	10–12,000 Hz	0–25 RPS	N/A	0–25 RPS	N/A
Analog Input/ Remote Speed Pot	•	•	—	•	—
Bipolar Chopper (20–30 kHz)	•	•	•	•	•
Idle Current Reduction	•	•	•	•	•
Short Circuit Protection	—	—	—	•	•
Thermal Protection	•	•	•	•	•
Fault Indicator (LED)	—	—	—	•	•
Fault Output (Signal)	—	—	—	•	•
CE & TÜV	—	•	•	•	•
Integral Indexer	—	—	•	—	•
Programmable Inputs/Outputs	—	—	8/3	—	8/3
Enable Input	•	•	—	•	—

Specification	Full and Half Step Drives
Specification	T/P1030	T/P1035D	T/P2035	T/P2035O	T/P3535	T/P3535O
Motor Current (A/phase)	0.1–1.0	0.1–1.0	0.125–2.0	0.125–2.0	0.4–3.5	0.4–3.5
Input Voltage (VAC)	12–30	12–35	12–35	12–35	12–35	12–35
Steps/revolution	200/800	200/400	200/400	200/400	200/400	200/400
Maximum Output Power (W)	30	35	70	70	120	120
Overall Size (mm)	57x41x20	61x25x76	14x102x38	76x102x38	76x102x38	76x102x38
Typical NEMA Motor Size	14, 17, 23	14, 17, 23	14, 17, 23	14, 17, 23	23, 34	23, 34
Screw Terminal Connectors	•	•	•	•	•	•
Built-in Oscillator	•	•	•	—	—	—
Oscillator Speed Range	—	—	0–5,000 Hz	—	—	400–5,000 Hz
Analog Input/ Remote Speed Pot	—	—	—	•	—	•
Bipolar Chopper (20–30 kHz)	•	•	•	•	•	•
Idle Current Reduction	•	—	•	•	•	•
Thermal Protection	•	•	•	•	•	•
CE	•	•	•	•	•	•
Input Enable	—	—	•	•	•	•

Specification	Microstepping Drives
Specification	T/P2035XD	T/P3540M	T/P3540MO	T/P5560	T/P7080
Motor Current (A/phase)	0.1–2.0	0.4–3.5	0.4–3.5	1.0–5.5	0.8–7.0
Input Voltage (VAC)	12–35	12–42	12–42	24–60	24–80
Steps/revolution	200–50,800	400–12,800	12,800	200–12,800	200–50,800
Maximum Output Power (W)	70	140	140	330	560
Overall Size (mm)	76x102x38	76x102x38	76x102x38	76x152x51	76x152x51
Typical NEMA Motor Size	11, 14, 17, 23	11, 14, 17, 23	11, 14, 17, 23, 34	17, 23, 34	17, 23, 34, 42
Screw Terminal Connectors	•	•	•	•	•
Built-in Oscillator	—	—	•	—	—
Oscillator Speed Range	0–40 RPS	—	0–25 RPS	—	—
Bipolar Chopper (20–30 kHz)	•	•	•	•	•
Idle Current Reduction	—	•	•	•	•
Short Circuit Protection	—	—	—	—	—
Thermal Protection	—	•	•	•	•
Fault Indicator (LED)	—	—	—	—	—
Fault Output (Signal)	—	—	—	—	—
CE	—	•	•	•	•
Integral Indexer	—	—	—	—	—
Programmable Inputs/Outputs	4/1	—	—	—	—

Specification	Microstepping Drive/ Si™ Indexer
Specification	T/P1240i	T/P3540i	T/P7080i
Motor Current (A/phase)	0.1–2.0	0.2–3.5	0.8–7.0
Input Voltage (VAC)	12–42	12–42	24–80
Steps/revolution	2,000–50,800	2,000–50,800	2,000–50,800
Maximum Output Power (W)	48	140	560
Overall Size (mm)	12x76x102	76x127x38	76x152x51
Typical NEMA Motor Size	11, 14, 17, 23	11, 14, 17, 23, 34	17, 23, 34, 42
Screw Terminal Connectors	•	•	•
Bipolar Chopper (20–30 kHz)	•	•	•
Idle Current Reduction	•	•	•
Short Circuit Protection	—	—	•
Thermal Protection	•	•	•
Fault Indicator (LED)	—	—	•
Fault Output (Signal)	—	—	•
CE	•	•	•
Integral Indexer	•	•	•
Programmable Inputs/Outputs	8/3	8/3	8/3
Encoder Interface	—	Optional	—

Printable version.